What started as a small shake operation for two men has flourished into a well-known, family-owned-and-operated cedar fencing mill. Wood products produced at the mill are used throughout North America for fencing projects.
Tod Reichert and his business partner, Lee Day, were two young men in the mid-1970s, cutting shake bolts and performing rigorous manual labor. Eventually, Reichert started a small shake mill and grew the company to six employees. In 1982, he added a Pendu saw to produce fence boards and log home material. Over the years, the log home products were discontinued, and more saws were added to focus on cedar fencing, which is the company’s current primary focus. Thirty-six years after Reichert started the company, it has grown to more than 60 employees, including Reichert’s daughter, Kim, and her husband, Jamy Wallace.
“I’m working in the mill, and I’m the log buyer,” Jamy Wallace says. “Kim sells the products and focuses on the day-to-day operations. We have a really good crew. We care about our employees, and we value their input. We all work together as a team to produce a consistent top-quality product.”
While other mills in the area offer a variety of wood products, Reichert Shake and Fencing focuses on producing high-quality western red cedar fence boards. Employees at the mill cut the cedar logs into various lengths and widths – from 4 feet to 8 feet in length – and 3 to 6 inches in width. “We cut a premium product, and we emphasize quality,” Wallace says. “We focus on our niche in the market, that’s our specialty, and we are known for our high quality and high grade.”
Log trucks deliver raw western red cedar logs from Oregon, Washington and Canada. Most wood comes from small private loggers and landowners; however, the company also buys from large timber companies such as Hancock and Weyerhaeuser, or bids on sales from the Department of Natural Resources in Washington.
Cedar logs processed at the mill can vary in age, from as little as 20- to 30-year-old cedars to as high as 80 to 100 years old. “You get better money out of the cedar when it gets older because it scales better,” Wallace says. “If you wait that extra five or 10 years, you’ll get a lot better price out of them.” Scaling is determined by the log’s width. “Once a cedar gets to 9 inches, it will almost double its board footage in the log,” he says. “Then, once it goes to 14 inches, it will double again.”
The mill measures success by the number of logs processed at the mill. Trucks deliver logs to the mill Monday through Friday, from 6:30 a.m. to 3:30 p.m., and the mill runs until 5 p.m. During busy times, the mill is open Saturdays, although they try to limit weekend work to allow employees to spend time with their families. “Some days we might only get five or six loads, and other days we might get 16 to 20,” Wallace says. “It depends on how good the weather is and how good our prices are.”
To keep up with the volume of cedar logs being delivered to the mill, the company depends on reliable and well-trained employees, as well as durable logging equipment. The company has three log loaders at the mill, and sometimes they need all three machines running to avoid holding up the log trucks that deliver the raw material. The mill racks up hours and hours on its log loaders. One model has more than 18,000 hours and is still performing at a high level. There is an inherent risk with machines with too many hours, which is what led the company to investigate new equipment, shopping around and looking at different machines. “If you don’t upgrade and your machine starts breaking down, of course you lose time, and time is money,” Wallace says. Their search ended when the company purchased a new Doosan® DX380LL-5 log loader.
Prior to purchasing the new model, the company spoke to logging companies in the area, including Buck’s Logging, which owns multiple Doosan® log loaders. That conversation led to more information and a demonstration from sales specialist Jim Wark at Cascade Trader – the Doosan equipment dealer in the area. “We were looking for a little bigger machine because in our yard, sometimes we will high deck logs, especially up front or in the back because of space issues,” Wallace says. “We wanted a bigger machine that could stack logs higher and move them around better.”
Wark brought a DX380LL-5 log loader to Reichert Shake and Fencing to let their operators test it. Veteran log loader operator Eldon Graves was one of the operators who put the DX380LL-5 through the paces at the mill. “Eldon has been with the company from the beginning; he’s our oldest operator, and he does an awesome job,” Wallace says.
Graves was sold on the machine from day one. He told Wallace and Wark that he preferred the DX380LL-5 log loader over another brand because of its performance. “We had a machine before that really beat him around, and when he got in the Doosan log loader, he really enjoyed it,” Wallace says. “The DX380LL-5 is really good on fuel efficiency, it’s fast and it’s strong. It’s heavy enough you can grab the loads, and it won’t jerk you around.”
2 feet makes a difference
One of the biggest differentiators of the Doosan DX380LL-5 log loader from other models at the mill is its reach. The machine has a maximum reach of 44 feet – 2 feet more than the company’s next largest model. “You wouldn’t think 2 feet would make that much difference, but boy it really does,” Wallace says. This is particularly true when the company’s operators are high decking logs. When they are high decking, they are putting the logs up higher to take better advantage of the space at the mill. “If you don’t have a big yard or you need more room, high decking comes in play,” Wallace says. “Last year we had more than 600 loads of logs in the yard, so we were jammed up pretty tight. We did a lot of high decking.”
In addition to high decking, operators use log loaders to unload the log trucks and feed the deck with logs. When trucks deliver the logs, operators use the log loaders with grapple attachments to sort them for efficiency. “We take the logs off the truck and put the shortest ones to the right and the longest ones to the left,” Wallace explains. “Sometimes logging companies will put the short logs on the front and the back. So, we must reach all the way up the log truck and grab the ones at the front without damaging the truck. The extra reach really helps to unload the trucks.”
The traditional practice of scaling the logs is done as soon as they are unloaded. “We measure the log’s width and we use a handheld scale, so we can take any deduction,” Wallace says. “After we’re done scaling the logs, we’ll put them on the deck where we’re going to run through the mill or we stack them to be used later.”
Another key selling point of the DX380LL-5 is the smoothness of the controls, especially when using a grapple to grab a log. Right-hand joystick controls in Doosan log loaders have a switch to control when the grapple opens and closes. The grapple stops closing as soon as the operator lets go of the switch. This is sometimes referred to as feathering. “When you’re grabbing a log, you can lighten up on the trigger and it won’t squeeze the log to death,” Wallace says. “You can actually crush logs or break them if they’re small. The Doosan log loader has a grapple trigger on it, so you can feather the trigger how tight you want to hold the log without busting it.”
Trying to get the most wood out of the logs that the mill processes is the goal. Every time the company can get an extra board, it’s another couple dollars. The precision of the DX380LL-5 boosts profits by helping him get the best out of what he’s got in his yard.